1967 Roosevelt Dime Value: Is Your No Mint Mark Coin Rare?

The 1967 Roosevelt Dime value is worth anywhere from its face value of $0.10 in worn condition to over $3,000 for rare specimens in pristine condition. While most of these coins are common change found in pockets today, certain rare errors and high-grade survivors can fetch a surprisingly high price among collectors.

Condition	Estimated Value Range
Circulated (Average Wear)	$0.10 – $0.25
Uncirculated (Mint State 60-65)	$1.00 – $15.00
High Grade (MS67+)	$50 – $400+
Rare Error/SMS Varieties	Up to $3,000+

Understanding the History of the 1967 Roosevelt Dime

If you have looked at your 1967 dime and wondered why there is no small letter (mint mark) near the date, you aren’t alone. Between 1965 and 1967, the United States Mint removed mint marks from all coins to discourage collectors from hoarding specific issues during a national coin shortage. This means that whether your coin was minted in Philadelphia, Denver, or San Francisco, it will look exactly the same—bearing no mint mark at all.

This era was a transitional time for American currency. Only a few years prior, the Mint had switched from 90% silver compositions to the copper-nickel “sandwich” coins we use today. Because billions of these 1967 dimes were struck, finding one in your spare change is incredibly common. To quickly determine if the specific coin in your hand has hidden value, many collectors use a top coin identifier app to scan the surface for minute details.

While most 1967 dimes are only worth their face value, the lack of a mint mark doesn’t mean the coin is a “no-mint mark error.” It was an intentional design choice by the U.S. government. However, for those using CoinKnow, the app can help distinguish between a standard business strike and a Special Mint Set (SMS) strike, which carries a much higher premium in the collectors’ market.

Why There Is No Mint Mark on the 1967 Dime

The mid-1960s were a tumultuous time for the U.S. Mint. As silver prices rose, people began hoarding silver quarters and dimes, leading to a massive shortage of circulating coinage. To combat this, the Coinage Act of 1965 was passed. The Director of the Mint at the time, Eva Adams, blamed coin collectors for the shortage, suggesting that collecting by “mint mark” encouraged people to take coins out of circulation.

As a result, from 1965 to 1967, all mint marks were removed from U.S. coins. This is why your 1967 Roosevelt Dime is blank on the reverse and obverse where a “D” or “S” would normally sit. It wasn’t until 1968 that the Mint resumed placing the “D” for Denver and “S” for San Francisco back onto the coins. Understanding this history is key when checking 1967 dime value charts, as it explains why there is only one “category” for this year.

Because there are no distinct mint locations to track, the value is entirely dependent on the coin’s physical condition. A coin that has been bouncing around in a cash register for 50 years will rarely be worth more than ten cents. However, a coin that was saved in a collection or found in a Special Mint Set can be worth significantly more. Utilizing CoinKnow can help you grade the luster and strike quality to see if your coin hits those higher price tiers.

Grading and Value Chart for 1967 Roosevelt Dimes

To understand what your coin is worth, you must look at its technical grade. Grading ranges from “Poor” (hardly recognizable) to “Perfect Uncirculated” (MS 70). For the 1967 dime, the massive production numbers mean that only coins in the “Mint State” (MS) category hold substantial value. Business strikes—the ones intended for daily spending—are generally graded on a scale of MS 60 to MS 68.

High-grade examples are rare because the copper-nickel surfaces of these coins scratch easily. When a coin reaches the grade of MS 67 or higher, the price jumps from a few dollars to hundreds. You can see the disparity in the 1967 dime price history, where high-grade specimens often set records at major auction houses like Heritage Auctions.

Grade	Estimated Value
Good (G-4) to Extremely Fine (XF-45)	$0.10 – $0.25
About Uncirculated (AU-55)	$0.30 – $0.50
Mint State (MS-63)	$2.00 – $5.00
Mint State (MS-65) Gem	$10.00 – $25.00
Mint State (MS-67)	$150.00 – $450.00
Mint State (MS-68)	$1,000.00+

Special Mint Set (SMS) 1967 Dimes

One of the most valuable versions of the 1967 dime is the Special Mint Set (SMS) strike. Since the Mint didn’t produce traditional “Proof” sets for collectors between 1965 and 1967, they created Special Mint Sets instead. These coins were struck with higher pressure on specially polished dies. They aren’t quite proofs, but they look much better than a standard dime you’d find in a roll from the bank.

SMS dimes have a satiny finish and very sharp details. If you find one that has a “Cameo” (CAM) or “Deep Cameo” (DCAM) appearance—where the portrait of Roosevelt is frosty and the background is mirror-like—you have found a winner. These specific varieties are highly sought after by registry set collectors who want the absolute finest examples of every year.

If you are unsure if your coin is a standard business strike or an SMS strike, CoinKnow provides high-resolution reference photos to help you spot the difference. The sharp strike on the torch, olive branch, and oak branch on the reverse is usually the biggest giveaway. SMS versions in high grades with “Full Torch” details can easily exceed several hundred dollars.

Rare 1967 Roosevelt Dime Errors to Look For

For muchos casual hunters, the real money is in the errors. Because the U.S. Mint was rushing to produce billions of coins to solve the shortage, quality control sometimes slipped. This resulted in several interesting error types that can make a 1967 dime worth much more than its ten-cent face value.

One common error is the “Double Die.” While there isn’t a massive, famous double-die for this year like the 1955 penny, minor doubling on the letters of “LIBERTY” or the date can still add a premium. Another exciting find is the “Off-Center Strike,” where the coin was not properly aligned with the dies, resulting in a crescent-shaped blank area on the coin.

Error Type	Recent Sales Value
10% – 20% Off-Center Strike	$20 – $50
Clipped Planchet (Missing edge)	$15 – $35
Die Crack (Small raised lines)	$5 – $10
Struck on 1-Cent Planchet (Copper)	$300 – $800+

The “Full Torch” Designation and Why It Matters

If you look at the reverse of the Roosevelt Dime, you’ll see a torch in the center. Professional graders at companies like PCGS or NGC provide a special “Full Torch” (FT) or “Full Bands” (FB) designation to coins that have complete, crisp horizontal lines at the top and bottom of the torch.

On most 1967 dimes, the strike was weak, and these lines are blurry or merged. Finding a 1967 dime with “Full Torch” details is incredibly difficult. This is the “Holy Grail” for Roosevelt Dime collectors. An MS 67 dime without Full Torch might sell for $100, while the same grade with Full Torch could sell for over $500.

Always check the torch bands under a magnifying glass. If the lines are distinct and separated by a clear groove, you should consider having the coin professionally graded. Even a small difference in the strike of the torch can result in a massive difference in the final sale price at auction.

FAQs

##

Q: Is a 1967 dime made of silver?

A: No, standard 1967 dimes are not made of silver. The U.S. Mint stopped using 90% silver for dimes after 1964. The 1967 dime is composed of a “clad” layers of 75% copper and 25% nickel over a pure copper core. If you see a copper ring on the edge of the coin, it is definitely not silver.

##

Q: How much is a 1967 dime with no mint mark worth?

A: Most 1967 dimes with no mint mark are worth exactly 10 cents. Because all dimes minted in 1967 were produced without mint marks, this is not a rare error. However, a specimen in perfect, uncirculated condition can be worth $1 to $15, while extremely high grades (MS 67+) can reach $400 or more.

##

Q: How can I tell if my 1967 dime is a Special Mint Set (SMS) coin?

A: SMS coins have a much sharper strike than regular business strikes. The fields (flat areas) are usually smoother and more reflective, though not as reflective as a mirror-like proof coin. The edges are also typically more “squared off” rather than rounded.

##

Q: What is the most valuable 1967 Roosevelt Dime ever sold?

A: The record for a 1967 dime is held by an MS 68 specimen with Full Torch details, which sold for over $3,000 at auction. Most high-value 1967 dimes are either high-grade SMS strikes or unique errors like being struck on the wrong metal planchet.